Advantage AirAdvantage Air

Contact Us

(740) 504-9430

Office Hours

M-F 8:00am-5:00pm

Click here to

Schedule Service

 

PRODUCT SELECTION

Keep Cozy During the Coldest of Winters

At the end of a long, cold day, there is nothing better than cuddling up in a warm, comfortable home. Advantage-Air has a broad selection of high-efficiency Luxaire furnaces that will keep you warm all winter long. Our top quality products are dependable and reliable. We have the utmost confidence in the furnaces that we install, and our warranty reflects that. You just cannot find a better combination than Luxaire products and our expert team of installers.

Products

Premium Comfort

Acclimate Series Gas Furnace

Acclimate™ Series gas furnaces are ENERGY STAR® qualified models that offer at least 15% to 25% higher energy efficiency than standard models — plus the innovative GeoTrak™ Comfort System creates an operating cycle that works best for your locale.

  • Most efficient furnace at up to 98% AFUE
  • Modulating burner
  • Variable-speed ECM motor
  • Silent comfort system
  • Lifetime limited heat exchanger warranty
  • 10-year limited parts warranty*

Superior Comfort

LX Series Gas Furnace

LX Series furnaces fit your needs with select ENERGY STAR® models that reduce your utility bills.

  • Superior efficiency at up to 96% AFUE
  • Two-stage burner
  • High efficiency ECM motor
  • Multi-position
  • Compact 33-inch cabinet
  • 20-year limited heat exchanger warranty
  • 10-year limited parts warranty*

Ultimate Comfort

Climasure Series Gas Furnace

Count on the high efficiency of Climasure™ Series gas furnaces to keep you warm in the coldest weather.

  • Superior efficiency at up to 95% AFUE
  • Single-stage burner
  • PSC 4-speed motor
  • Compact 33-inch cabinet
  • Lifetime limited heat exchanger warranty
  • 10-year limited parts warranty*

Standard Comfort

Climasure Series Gas Furnace

Count on the high efficiency of Climasure™ Series gas furnaces to keep you warm in the coldest weather.

  • Superior efficiency at up to 95% AFUE
  • Single-stage burner
  • PSC 4-speed motor
  • Compact 33-inch cabinet
  • Lifetime limited heat exchanger warranty
  • 10-year limited parts warranty*
 

Getting to Know Your Gas Furnace

90%+ Furnaces

A 90% plus furnace has two heat exchangers (a primary and a secondary) and are commonly called “condensing” furnaces.  These furnaces are capable of extracting at least 92% of the heat from combustion and transferring it into your home.  The term “90% plus” means just that, the furnace’s efficiency rating is above 90%.  For each $1.00 of natural gas that the furnace uses, at least 92% (or $.92) is used to actually heat your home and the remaining 8% (or $.08) is vented to the outside through the sidewall or roof of your home using a PVC plastic pipe.

80% Furnaces

An 80% efficiency furnace has only one (or primary) heat exchanger and extracts at least 80% of the energy from the combustion process and transferring it into your home.  Simply stated, for each $1.00 of natural gas or propane that is used by the furnace, at least 80% (or $.80) is actually used to heat your home.  The remaining 20% (or $.20) is vented out through your chimney or flue pipe.

Modulating

Modulating gas furnaces are very high efficiency furnaces, usually 95% and higher.  These models also use computer technology along with special gas valves to control the burner output.  The burner levels on these models operate at varying levels hence the term “modulating”.  When the room thermostat calls for heat, the furnace fires and starts operating at a “medium” level.  The furnace operates at this level for a short period and as the temperature gets closer to the set point, the furnace “modulates” to the lowest level until the thermostat is satisfied.  In cases where the thermostat is set significantly higher than the room temperature or the heat demand is high, the furnace will operate on the highest stage in order to warm the home up as fast as possible.

Two-Stage

Two-stage gas furnaces are available in both 80% and 90% efficiencies.  However, two-stage furnaces use a microprocessor along with a two-stage gas valve to control the burners at a high or low rate, depending on the heat demand. When the outside temperatures are moderate, the burners operate at a lower, more efficient rate.  If the outside temperatures are very cold, then the furnace will operate at the higher rate in order to keep up with the heating demand.

Single-Stage

Single-stage gas furnaces are available in both 80% and 90% efficiencies.  The term “single-stage” means simply that the furnace’s burners fire at one fixed heating level.  When the thermostat tells the furnace to heat, the gas valve opens and the burner flame ignites.  When the thermostat is satisfied, the burners shut-off.

ECM Variable-Speed Motor

Unlike conventional PSC motors which are designed to run at 1 speed, an ECM variable-speed motor can run at a wide range of speeds to precisely deliver the exact airflow required to heat or cool the home to temperature called for by the thermostat. Typically, an ECM motor will turn on and gradually increase the speed of the fan as more air is called for, and decrease the speed as target temperature is close to being met. Additionally, variable-speed motors are much quieter than conventional motors and improve air circulation which results in reduced temperature swings, greater indoor comfort and significant energy savings.Unlike conventional PSC motors which are designed to run at 1 speed, an ECM variable-speed motor can run at a wide range of speeds to precisely deliver the exact airflow required to heat or cool the home to temperature called for by the thermostat. Typically, an ECM motor will turn on and gradually increase the speed of the fan as more air is called for, and decrease the speed as target temperature is close to being met. Additionally, variable-speed motors are much quieter than conventional motors and improve air circulation which results in reduced temperature swings, greater indoor comfort and significant energy savings.

PSC Motor

A PSC motor is designed to more simply turn on and turn off. The output of a PSC motor is isn’t controllable and it has no intermediate speeds, which means it’s either running at it’s full output or isn’t running at all.

A portion of your Luxaire® equipment purchase is donated to Make-A-Wish Foundation®

This season, that home comfort system you’ve been wishing for is now within reach. You’ll feel comfortable in so many ways from ideal indoor temperatures and lower utility bills thanks to our ENERGY STAR®-qualified Luxaire home comfort systems. And with part of your purchase supporting our sponsorship of the Make-A-Wish Foundation, we’ll deliver more than just the comfort you’ve been wishing for.  So end your wishing and call us today!

 

Contact Advantage Air

Fill out the form below for HVAC services that will fit your needs and your budget.

powered by FormCrafts form builder

Call Today

If your HVAC system is on the fritz, Advantage Air is the place to call!  Located in Danville, Ohio and serving Knox county and the surrounding communities, the guys at Advantage Air have over a decade of experience with heating, cooling and electrical systems.

OH LIC # 47106

Service Area

  • Apple Valley
  • Blandensburg,
  • Butler
  • Danville
  • Fredericktown
  • Gambier
  • Howard
  • Loudonville
  • Mt. Vernon
  • Martinsburg
  • Sreve
  • Utica

→View Full Service Area

© 2015 Advantage Air. Website Created by Fusion Design